
CNC routing / Las Vegas
CNC cutting for large, repeatable sign and display components.
Velocity routes rigid materials into letters, logos, panels, patterns and fabricated parts for signs, exhibits and branded environments.
- Las Vegas production
- One accountable team
- Print, fabrication and installation
Digital files to physical components
CNC routing is most useful when the material, tool path and finish are planned together.
CNC equipment can cut large rigid sheets and repeat shapes consistently, making it valuable for dimensional letters, sign panels, patterns, pockets, mounting features and display components.
The file must reflect final scale, material thickness, tool diameter, interior corners and any tabs or hold-down strategy. Edge finish and secondary fabrication may influence how parts are nested and cut.
Velocity connects routing to printing, finishing, assembly and installation when the project requires a complete build rather than loose parts.

Project scope
CNC-routed components for commercial graphics.
Dimensional letters
Large letters and logo shapes cut from rigid materials for finishing and mounting.
Sign panels
Custom outlines, holes, pockets and edge profiles prepared for fabrication.
Display parts
Repeatable components for exhibits, fixtures and temporary branded environments.
Patterns and stencils
Large templates and repeating shapes produced from suitable sheet materials.
Printed contour cuts
Rigid printed graphics routed to approved outlines and registration.
Prototype components
Physical parts used to confirm scale, fit or assembly before a larger run.

File preparation
Account for the cutting tool, not only the visible outline.
A rotating bit cannot create every infinitely sharp inside corner, and narrow details may be smaller than the available tool or too fragile for the material. Vector paths should be clean, closed and scaled accurately.
Share pockets, holes, countersinks, edge profiles and tolerances as explicit production information rather than relying on visual inference.

After the cut
Plan sanding, paint, faces, hardware and assembly with the routing.
Routed parts may need edge cleanup, paint, laminated faces, spacers, studs or assembly before they are ready for use. Visible edges and mounting should influence the material and cut plan.
Velocity can scope those finishing steps with the routed components.
How the work moves
One team carries the work forward.
Define the brief
Share the artwork, dimensions, quantity, destination and deadline. We identify open questions before they become production problems.
Choose the right build
Materials, print method, finishing and installation are matched to the environment instead of selected in isolation.
Coordinate the finish
Production, quality checks, delivery and field work move through one accountable local team.
Selected work
Proof in the finished environment.



Keep planning
Build the rest of the project path.
Project questions
Useful details before production starts.
What materials can be CNC cut?
Capabilities depend on the specific material, thickness, sheet size, tool and finish. Common sign and display substrates can be evaluated from the project files and material requirements.
What file format is needed for CNC routing?
Clean vector paths at final scale are typically required, along with material thickness, cut depth, holes, pockets, tolerances and any edge requirements.
Can routed parts be painted or assembled?
Yes. Finishing and assembly can be included when the color, surface quality, hardware, fit and final use are defined.
Start the conversation
What do you have coming up in Vegas?
Send it our way.
A concept, rendering, photo, or unusual idea is enough to start. We will help determine the right production path.
Main office702.485.5110 EmailWeNeedGraphics@velocitydpi.com Production office3391 W. Oquendo RoadLas Vegas, NV 89118
